Author Topic: electric embedder  (Read 4746 times)

0 Members and 1 Guest are viewing this topic.

Offline skydiver

  • Regular Member
  • **
  • Posts: 58
  • Thanked: 1 times
  • Gender: Male
  • Location: Fennville, michigan
electric embedder
« on: January 29, 2014, 11:51:21 am »
This how I made my own embedder I started with a piece of wood 16"x3"x3/4". I then ripped the top cover off by removing a piece 16"x1/4"x3/4" strip, set it aside for later.     Fallow instructions on photo.









 When using must have good contact on all three contacts if not it may ark and break your wire. Use a backer under foundation just as you would with a spur embedder.
skydivers do not want to jump to a conclusion!

Offline Perry

  • Global Moderator
  • Gold Member
  • *******
  • Posts: 7382
  • Thanked: 390 times
  • Gender: Male
    • Brandt's Bees
  • Location: Annapolis Valley, Nova Scotia
Re: electric embedder
« Reply #1 on: January 29, 2014, 06:09:15 pm »
I love picture tutorials, much easier to follow! Thanks for the post.  :)
"It is not the man who has too little, but the man who craves more, that is poor."      
Forum Supporter

Offline riverbee

  • Gold Member
  • ****
  • Posts: 8924
  • Thanked: 410 times
  • Gender: Female
  • ***Forum Sponsor***
  • Location: El Paso Twp, Wisconsin
Re: electric embedder
« Reply #2 on: January 29, 2014, 09:21:10 pm »
sky, thanks for posting and sharing your pix and tutorial!
i keep wild things in a box..........™
if you obey the rules, you miss all the fun.....katherine hepburn
Forum Sponsor