Author Topic: Candy board cover  (Read 1740 times)

0 Members and 1 Guest are viewing this topic.

Offline Mikey N.C.

  • Gold Member
  • ****
  • Posts: 1393
  • Thanked: 76 times
  • Gender: Male
  • Location: Cameron N.C.
Candy board cover
« on: November 20, 2016, 09:08:18 am »
Made some feeder boards to try this winter. Q is the 5/8 " hole in front enough for ventilation. Q do you use inner cover on top of board and then tele. cover ?




Offline rwlaw

  • Senior Member
  • ***
  • Posts: 250
  • Thanked: 35 times
  • Gender: Male
  • Location: Grand Rapids MI
Re: Candy board cover
« Reply #1 on: November 20, 2016, 03:48:03 pm »
I put the inner cover over the feeder ring to take advantage of the notch for humid air to escape myself, but I put styrofoam on the top cover to break the cold air hitting it causing condensation on the underside. And yes a 5/8" hole is fine IMO, you probably don't have the bad cold winds us Yankees do. I run 1" holes and regulate the size with tapered corks. That way I can peek in there and see if the cluster is getting near the topbars and need sugar blocks.
It's not a honeybee, it's a honey bee. Whateveer!
The following users thanked this post: Mikey N.C.