« previous next »
Pages: [1]   Go Down

Author Topic: Round 2 on the Bee Vac  (Read 8414 times)

0 Members and 1 Guest are viewing this topic.

Offline Finally Home

  • Senior Member
  • ***
  • Posts: 291
  • Gender: Male
Round 2 on the Bee Vac
« on: January 02, 2014, 02:35:28 pm »
Well here's my second attempt.  Hopefully I done better this time.  Only thing I haven't changed is the hose size due to the fact I haven't been out to buy a larger one yet.
Got the day off today due to all the snow (makes me feel like a kid getting a snow day) ;)

Changes I made from first attempt.  I decided to use the bucket vac for my basement work shop and use the motor from the larger one.  It is removeable.  Top board is still removable but I have to make the vent hole one large one instead of the small ones due to the larger vac.  Screen has been added to the bottom of the top board with a center brace.  Shim has the wire mesh removed and a trimmed down propolis trap installed with center brace.  It is removable.   

Other than cutting the larger vent hole and getting the larger entrance hose is there anything else I missed. 







Logged

Offline LazyBkpr

  • Global Moderator
  • Gold Member
  • *******
  • Posts: 6842
  • Thanked: 205 times
  • Gender: Male
  • www.outyard.net
    • The Outyard
  • Location: Richland Iowa
Re: Round 2 on the Bee Vac
« Reply #1 on: January 02, 2014, 02:47:16 pm »
You havent painted it yet???    ;D   Looks good! What did you use for the slide in screen?  Propolis trap maybe?
Logged
Drinking RUM before noon makes you a PIRATE not an alcoholic!

*Sponsor*

Offline Finally Home

  • Senior Member
  • ***
  • Posts: 291
  • Gender: Male
Re: Round 2 on the Bee Vac
« Reply #2 on: January 02, 2014, 02:55:57 pm »
LOL - I almost did a quick edit to say I still need to fire up the torch to finish the paint job.................

Yep, propolis trap.  Trimmed 3/8" off each side.  Left the length alone.  Gives me a good grip for pulling it out.

Got lucky.  Put a panel blade in the table saw and lil by lil raised it. Ran the edge of the one with the wire mesh in it till I was able to slide it out, then slipped the trap in.  Easier than making a new one.

Logged

Offline LazyBkpr

  • Global Moderator
  • Gold Member
  • *******
  • Posts: 6842
  • Thanked: 205 times
  • Gender: Male
  • www.outyard.net
    • The Outyard
  • Location: Richland Iowa
Re: Round 2 on the Bee Vac
« Reply #3 on: January 02, 2014, 03:05:12 pm »
Indeed! Great Idea!!
Logged
Drinking RUM before noon makes you a PIRATE not an alcoholic!

*Sponsor*

Offline G3farms

  • Bee Wrangler
  • Global Moderator
  • Gold Member
  • *******
  • Posts: 1724
  • Thanked: 37 times
  • Gender: Male
  • Location: Concord, TN
Re: Round 2 on the Bee Vac
« Reply #4 on: January 02, 2014, 06:55:50 pm »
Now THAT looks like a jim dandy bee vac!! The only thing I might have changed would be to turn the sliding lid around so it can be slid out with out undoing the strap.

Just add a little weather stripping on the edges and it will be right up town!

If you think you have leaks, use your smoker to find them. Puff a little smoke around the joints and it will be sucked in.

Looks good. Now we need some bee removal videos LOL
Logged
Bees are bees and do as they please!

.... --- -   -... . . ...   .-- .. .-.. .-..   .... .- ...- .   -.-- --- ..-   ... - . .--. .--. .. -. --.   .- -. -..   ..-. . - -.-. .... .. -. --.   .-.. .. -.- .   -.-- --- ..- .-.   .... . .- -..   .. ...   --- -.   ..-. .. .-. .   .- -. -..   -.-- --- ..- .-.   .- ... ...   .. ...   -.-. .- - -.-. .... .. -. --.

Offline Finally Home

  • Senior Member
  • ***
  • Posts: 291
  • Gender: Male
Re: Round 2 on the Bee Vac
« Reply #5 on: January 02, 2014, 07:12:50 pm »
You know I did look at that but didn't flip it around. I do have a lil lip on the one end but that can be removed.   For leaks I just move a kleenex along the edges and find them with no trouble. 
I'll be using it come spring with that hive I have up in a tree.       http://www.worldwidebeekeeping.com/forum/index.php/topic,300.0.html

Thanks for the help.  Some day I'll get into video's.....
Logged

Offline robo

  • Senior Member
  • ***
  • Posts: 857
  • Thanked: 86 times
  • Gender: Male
  • Beekeep On!
    • Ramblings, Rants, & Ravings
  • Location: Scenic Catskill Mountains
Re: Round 2 on the Bee Vac
« Reply #6 on: January 03, 2014, 08:41:26 am »
You will need a bigger bypass with the bigger vac head.
Logged

"Opportunity is missed by most people because it comes dressed in overalls and looks like work." - Thomas Edison

Offline Finally Home

  • Senior Member
  • ***
  • Posts: 291
  • Gender: Male
Re: Round 2 on the Bee Vac
« Reply #7 on: January 19, 2014, 08:07:20 pm »
Just ordered a 2 1/2" X 20' shop vac hose.  Not bad.  Home depot for $25  Should be set.
Thanks again for all the help.
Logged

Offline Perry

  • Global Moderator
  • Gold Member
  • *******
  • Posts: 7382
  • Thanked: 390 times
  • Gender: Male
    • Brandt's Bees
  • Location: Annapolis Valley, Nova Scotia
Re: Round 2 on the Bee Vac
« Reply #8 on: January 19, 2014, 08:12:14 pm »
Brilliant idea using the propolis trap as the screen!  :goodone:
Logged
"It is not the man who has too little, but the man who craves more, that is poor."      
Forum Supporter

Offline Finally Home

  • Senior Member
  • ***
  • Posts: 291
  • Gender: Male
Re: Round 2 on the Bee Vac
« Reply #9 on: January 19, 2014, 08:20:39 pm »
Quote from: Perry on January 19, 2014, 08:12:14 pm
Brilliant idea using the propolis trap as the screen!  :goodone:

Robo's brilliant idea and I agree with you.  Saw it on his web site  :) :) 
Logged
Pages: [1]   Go Up
« previous next »